MCA-C3

Multizone Controller Amplifier

The MCA-C3 Multizone Controller Amplifier provides six zones of distributed stereo audio from any of six sources. The source loop outputs and the addition of up to five additional controllers allow for scalability to 36 zones.

INPUTS: 6 (including internal tuner)
OUTPUTS: 6 speaker levels (Zones1-6)
(2 line level fixed or variable)
EXPANSION: expandable up to 36 zones
TRIGGERS: 6 12VDC 100mA output, 1 home theatre output,
1 home theatre 12VDC trigger input , 1 page 12VDC trigger input
IR: 6 routed IR ports
     1 common IR port
SUB ZONES: None
POWER: 80  watts per zone
IMPEDANCE: 8 ohm
COMMUNICATION PORTS: Front- 1 USB 2.0/1.1 Rear-1 serial RS-232, 1 Ethernet RJ-45, 2 RJ-45 RNET links In/out
SIZE: 430 x 90 x 436 mm (WHD)

For Australian sale only.

MCA-C5

Multizone Controller Amplifier

Russound's C-Series Multizone kit provides a powerful, scalable and intuitive means to control and enhance your multiroom audio experience. The KT1-C5 kit includes a MCA-C5 Multizone Controller Amplifier, six MDK-C5 Multiline Display Keypads and a SRC-C5 System Remote Control. The system offers control of eight sources and zones, advanced features, and digital amplification.

INPUTS: 8 (including internal tuner and page input)
OUTPUTS: 6 speaker levels (Zones1-6)
(8 line level fixed or variable)
EXPANSION: Up to 36 zones (linking extra  MCA-C5  ) data over RNET
TRIGGERS: 8 Zone output triggers, 1 common output trigger,
1 home theatre 12VDC trigger input 
IR: 6 routed IR ports
     1 common IR port
SUB ZONES: None
POWER: 80  watts per zone
IMPEDANCE: 8 ohm
COMMUNICATION PORTS: Front- 1 USB Rear-1 serial RS-232, 1 Ethernet RJ-45
SIZE: 430 x 90 x 436 mm (WHD)

For Australian sale only.

VM1

Video Matrix

The VM1 Video Matrix works with a multi-room audio system to distribute component video. It routes video signals to VMR1 receivers in as many as eight zones, each using a single CAT-5e cable.Capable of handling high-definition component video signals, the VM1 was designed for use with Russound RNET® multi-room solutions. It provides seamless integration with Russound CAM, CAV, and CAA66 multi-room systems and works with other distributed audio systems using RS-232 serial control. Designed with the future in mind, the VM1 is able to support 1080p resolution in the analogue component video format if such content becomes available.

For Australian sale only.

CAV6.6

Multi-Room Amplifier
6 Zone 6 Source

The CAV6.6 is loaded with features for your convenience. Favourite program presets, party mode where the ALL zone can be controlled from one keypad. Expandable up to 36 zones by linking CAV’s together via RNET link.

INPUTS: 6 Audio (RCA)
6 Video (RCA) composite
OUTPUTS: 6 Audio (RCA) loop through
6 Video (RCA) loop through
6 pair speaker outputs (14 gauge snap terminals)
EXPANSION: Up to 36 zones (linking extra CAV6.6) data via RNET
TRIGGERS: 12 VDC in / out
Page / door bell mute with audio / video feed
IR: 6 routed IR ports
SUB ZONES: 4 A-BUS/READY sub zones
POWER: 40 watts per zone
IMPEDANCE: 8 ohm
PROGRAMMING: RS-232 front and rear, use PC-Power Tools software (not included) or from keypad
Pre programmed IR library
SIZE: 430 x 90 x 305 mm (WHD)

For Australian sale only.

CAM6.6

Multizone Controller Amplifier
6 Zone 6 Source

The CAM6.6 multi-room receiver distributes six audio sources into six zones. Multiple receivers can be linked together for additional zones (up to 36 zones). Same as the CAV6.6 and its party mode.

INPUTS: 6 Audio (RCA)
OUTPUTS: 6 Audio (RCA)
6 pair speaker outputs (14 gauge snap terminals)
Zone 1 & 2 fixed / variable for remote room amplifiers
EXPANSION: Up to 36 zones (linking extra CAM6.6) data via RNET
TRIGGERS: 12 VDC in / out
Door bell mute
IR: 6 routed IR ports
1 common IR port
SUB ZONES: None
POWER: 40 watts per zone
IMPEDANCE: 8 ohm
PROGRAMMING: RS-232 rear, use PC-Power Tools software (not included) or from keypad
Pre programmed IR library, IR learning on rear
SIZE: 430 x 90 x 305 mm (WHD)

For Australian sale only.

CAM6.6T

Multizone Controller Amplifier
6 Zone 6 Source

The CAM6.6T comes complete with AM / FM built-in tuner including party mode. Up to 6 CAM6.6T can be linked together for additional zones.

INPUTS: 5/6 audio (RCA), source 1 switchable to internal tuner
OUTPUTS: 6 pair speaker outputs (14 gauge snap terminals)
Zone 1 & 2 fixed / variable for remote room amplifiers
EXPANSION: Up to 36 zones (linking extra CAM6.6) data over RNET
TRIGGERS: 12 VDC in / out
Door bell mute
IR: 6 routed IR ports
1 common IR port
SUB ZONES: None
POWER: 40 watts per zone
IMPEDANCE: 8 ohm
PROGRAMMING: RS-232 rear use PC-Power Tools software (not included) or via keypad
Pre programmed IR library, IR learning on rear
SIZE: 430 x 90 x 305 mm (WHD)

For Australian sale only.

CAA66

Multizone Controller Amplifier
6 Zone 6 Source

The new CAA66 offers exceptional value, straightforward operation and simplified programming for multi-room audio made easy.

INPUTS: 6 audio (RCA)
OUTPUTS: 6 pair speaker outputs (14 gauge snap terminals)
Zone 1 & 2 fixed / variable for remote room amplifiers
EXPANSION: Up to 36 zones (linking extra CAA66) no data transfer between units
TRIGGERS: 12 VDC in / out, page (door bell mute)
IR: 6 routed IR ports
1 common IR port
SUB ZONES: None
POWER: 40 watts per zone
IMPEDANCE: 8 ohm
PROGRAMMING: RS-232 rear use PC-Power Tools software (not included) or via keypad
Pre programmed IR library
SIZE: 430 x 90 x 305 mm (WHD)

For Australian sale only.

CAS44

Multizone Controller Amplifier
4 Zone 4 Source

Easy to install, easy to program, easy to use.

INPUTS: 4 audio (RCA)
OUTPUTS: 4 pair speaker outputs (14 gauge snap terminals)
TRIGGERS: 12 VDC in / out, page (door bell mute)
IR: 2 common IR port
SUB ZONES: None
POWER: 40 watts per zone
IMPEDANCE: 8 ohm
PROGRAMMING: Via keypad
SIZE: 430 x 90 x 305 mm (WHD)

For Australian sale only.

CA4

Multizone Controller Amplifier
4 Zone 4 Source

Easy to install, easy to program, easy to use.

Audio Source Inputs 4
Max Source Audio Input 2.3 Vms
Input Impedance 50 kohms
Wall Port Ports 4
Routed IR Ports 4
Common IR Port 1
Amplified Audio Zone Outputs 4 speaker level (8 ohms)
Line Audio Outputs 2 (Fixed and Variable) (Zone 4 only)
Watts per Channel 15
Frequency Response 20 Hz - 20 kHz
Communication Ports RS232 port
Trigger Output 12VDC 100 mA Max
Trigger Input 12VDC

For Australian sale only.