ALT

Impedance Matching Volume Control

The ALTx-2D is a wall-mounted, speaker-level, UltraMatch volume control. It connects between the speaker outputs of an amplifier or receiver and a pair of speakers. The 1x setting allows the volume control to be used as a standard non-impedance matching control. The 2x, 4x, and 8x settings allow it to be used as an UltraMatch control. The UltraMatch volume control provides a method of matching the minimum output impedance of an amplifier or receiver, in addition to attenuating the volume. This eliminates the need for a speaker selector or other impedance matching equipment.

For Australian sale only.

WALT

Weather-Proof Volume Control

The WALTx-2 is a surface-mounted, weather-proof, speaker-level, UltraMatch volume control. All the same features as the ALT.
The WALTx-2 is designed to provide volume control for outdoor or wet locations. It can be mounted on an exterior wall or hard, flat surface, as well as directly on a section on 3/4" PVC conduit. The WALTx-2 provides superior protection against moisture from rain, splash or sauna.

For Australian sale only.

R-DM1

Door Bell Interface

Doorbell interface. Provides 12-volt triggered output.
Ideal for muting the CAS44, CAA66, CAV6.6 and CAM6.6/T
Versatile to be used in many other applications.

For Australian sale only.

VBC

Composite Audio/Video Balun

The VBC Composite Audio-Video Active Balun kit includes the CTX transmitter module, the CRX Receiver module and a power supply (for either module) to send composite video and audio over Cat-5 up to 1000 feet point to point.
Requires 12VDC 1 Amp power supply, PS-1R (not included)

For Australian sale only.

VBHD

Composite Video Balun

The VBHD Component Video Active Balun kit includes the HDTX transmitter module, the HDRX Receiver module and a power supply to send component video over CAT-5 up to 500 feet point to point
Requires 12 VDC 1 Amp Power supply PS-1R (not included)

For Australian sale only.

SA-ZX3

Keypad Splitter

Powers extra UNO keypads
Powers up to 3 extra keypads on one keypad port
Use on CAM, CAS, CAA and CAV controllers
Requires 12VDC, 1 Amp, PS-1R (not included)

For Australian sale only.

MOD-VB

In-Wall Video Balun

RCA to RJ-45 video signal converter
Allows video over Cat-5 from room to room
Fits HPM wall plates or use Russound PM-MOD1D adaptor for screwless wall plate
Max run 600 m

For Australian sale only.

SRM-2.1

Speaker Relay Module (LIM)

The SRM-2.1 allows a local amplified source to play through the rooms speakers even when the multi-room audio system is turned off.

INPUTS: 4 x banana, 4 x screw terminals
OUTPUTS: 2 x screw terminals
CONNECTIONS: Gold Banana’s
POWER: 12VDC (switching)
PROFILE: 17 mm
SIZE: 75 x 116 x 13 mm (WHD)

For Australian sale only.

PC-POWER TOOL

PC-Power Tool

The easiest way to program your Russound systems.
Allows you to program UNO-S2 keypad and RNET controllers (CAM / CAV).
Complete with all programming cables, CD’s, 110 punch down tool.

For Australian sale only.