tailoring audio systems for all walks of life
 
Product Guide
Active Thermal
Andrews Audio
AV distribution
Cable
Connecting blocks & Emitters
IR receivers
IR interfaces
Matching transformers
Multi-zone controllers
Power supplies & Miscellaneous
Volume controls
A-BUS (Forté)
Channel Vision
Forté Intercom
Forté IR
MuxLab
Russound
SoundCast
TruAudio
Terra
Order Form
Installation Portfolio

 

 

AZ-66

AZ-66

6 Zone Pre-amplifier, 6 Stereo Audio Inputs,
6 pre-out (line-level) zone outputs

INPUTS: Audio: 6 stereo inputs, infrared: 6 zone (routed) ports
OUTPUTS: Audio: 6 pre-out (line-level) zone outputs (adjustable),
6 expansion ports (active buffering)
INFRARED: 6 emitter ports (individually routed)
STATUS: 6 zone outputs and one common
POWER: 12V DC 500mA auxiliary output
OTHER: Power supply: 12V AC 2 amp (included)
CONTROL: 6 x RC-6 remote control included (1 per zone)
NOTE: Requires compatible multi-channel amplifier,
see Russound section

Australian MadeAdditional information availableProduct ImageAdditional information available

AZ-64

AZ-64

4 Zone Pre-amplifier, 6 Stereo Audio Inputs,
6 pre-out (line-level) zone outputs

INPUTS: Audio: 6 stereo inputs, infrared: 6 zone ports
OUTPUTS: Audio: 4 pre-out (line-level) zone outputs (adjustable),
6 expansion ports (active buffering)
INFRAFRED: 6 emitter ports (individually routed)
STATUS: 4 zone outputs and one common
POWER: 2V DC 500mA auxiliary output
OTHER: Power supply: 12V AC 2 amp (included)
CONTROL: 4 x RC-6 remote control, 1 per zone (included)
NOTE: Requires compatible multi-channel amplifier,
see Russound section

Australian MadeAdditional information availableProduct ImageAdditional information available

PM-64

PM-64

Page / Mute Module

Apply 12v and mute audio inputs
Use with paging system
4-way L+R RCA audio loop through
12v trigger input
Page input/output

Australian MadeAdditional information availableProduct ImageNo additional information available

CB-64

CB-64

Home Theatre Infrared Module for AZ-64 / AZ-66

6-way switchable IR router for infrared commands from source components and AZ-64/66 to a home theatre receiver.

1 infrared receiver input for home theatre
1 emitter port for home theatre amplifier,
Voltage requirement either from AZ-64/66 or PS-1

Australian MadeAdditional information availableProduct ImageNo additional information available